![1,200cc Mini Sprint Rules Announced for the Tulsa Shootout](https://dy5vgx5yyjho5.cloudfront.net/images/v2/1200x1200-V4z3rNS8g2cXLx293729.jpg)
![10/12/2015](https://dy5vgx5yyjho5.cloudfront.net/images/v2/profile-P6k2xEvW34x895602.jpg)
10/12/2015
Tulsa Shootout
1,200cc Mini Sprint Rules Announced for the Tulsa Shootout
TULSA, Okla. (October 12, 2015) With the addition of both winged and non-winged divisions to the 31st annual Speedway Motors Tulsa Shootout, the rules package for the 1,200cc Mini Sprints has been confirmed.
Rules for the 1,200cc Mini Sprints are as follows:
Non-Wing 1,200cc Mini Sprints
Age: Drivers must be a minimum of 13 years of age.
Roll Cage/Chassis:
Roll Cage minimum size 1 ¼”, .095 4130 Chromoly Tubing. The front section of the cage shall be no further back than the steering wheel. Roll cage shall have sufficient fore and aft bracing, and strength to support the weight of the car and driver in case of an upset. Cage shall have gussets at the intersecting bars to the uprights. Bends must have at least 3 inch radius. No square or pointed corners allowed. Roll cage must be a minimum of 3 in. above the driver’s helmet.
Wheelbase shall be 64” to 74”.
Must be Chain Drive. Chain guards mandatory. It must shield Driver from chain.
Must have sprint car style hood, tail and have the appearance of an open wheeled dirt sprint car. No modified styles or radical offsets.
Motor not to be offset more than 6” from chassis centerline. (No sidewinders)
All cars to be equipped with either a steering gear or rack and pinion.
A firewall between engine and driver is required.
Tires/Wheels: Tire Rule:
- Right rear must be a Hoosier RD15, D15, SP2, SP3 or ECOtec. 13” wheels only.
Engine:
Roll Cage minimum size 1 ¼”, .095 4130 Chromoly Tubing. The front section of the cage shall be no further back than the steering wheel. Roll cage shall have sufficient fore and aft bracing, and strength to support the weight of the car and driver in case of an upset. Cage shall have gussets at the intersecting bars to the uprights. Bends must have at least 3 inch radius. No square or pointed corners allowed. Roll cage must be a minimum of 3 in. above the driver’s helmet.
Wheelbase shall be 64” to 74”.
Must be Chain Drive.
Chain guards mandatory. It must shield Driver from chain.
Must have sprint car style hood, tail and have the appearance of an open wheeled dirt sprint car. No modified styles or radical offsets.
Motor not to be offset more than 6” from chassis centerline. (No sidewinders)
All cars to be equipped with either a steering gear or rack and pinion.
A firewall between engine and driver is required.
Minimum Weight:
(Post race with driver)
Stock Bore & Stroke 1000cc or less engines 925 lbs.
Up to 1205cc engines 975 lbs. .
Winged 1,200cc Mini Sprints:
Age: Drivers must be a minimum of 13 years of age.
Roll Cage/Chassis:
Roll Cage minimum size 1 ¼”, .095 4130 Chromoly Tubing. The front section of the cage shall be no further back than the steering wheel. Roll cage shall have sufficient fore and aft bracing, and strength to support the weight of the car and driver in case of an upset. Cage shall have gussets at the intersecting bars to the uprights. Bends must have at least 3 inch radius. No square or pointed corners allowed. Roll cage must be a minimum of 3 in. above the driver’s helmet.
Wheelbase shall be 64” to 74”.
Must be Chain Drive. Chain guards mandatory. It must shield Driver from chain.
Must have sprint car style hood, tail and have the appearance of an open wheeled dirt sprint car. No modified styles or radical offsets.
Motor not to be offset more than 6” from chassis centerline. (No sidewinders)
All cars to be equipped with either a steering gear or rack and pinion.
A firewall between engine and driver is required.
Tires/Wheels: Tire Rule:
- Right rear must be a Hoosier RD15, D15, SP2, SP3 or ECOtec. 13” wheels only.
Engine:
Roll Cage minimum size 1 ¼”, .095 4130 Chromoly Tubing. The front section of the cage shall be no further back than the steering wheel. Roll cage shall have sufficient fore and aft bracing, and strength to support the weight of the car and driver in case of an upset. Cage shall have gussets at the intersecting bars to the uprights. Bends must have at least 3 inch radius. No square or pointed corners allowed. Roll cage must be a minimum of 3 in. above the driver’s helmet.
Wheelbase shall be 64” to 74”.
Must be Chain Drive.
Chain guards mandatory. It must shield Driver from chain.
Must have sprint car style hood, tail and have the appearance of an open wheeled dirt sprint car. No modified styles or radical offsets.
Motor not to be offset more than 6” from chassis centerline. (No sidewinders)
All cars to be equipped with either a steering gear or rack and pinion.
A firewall between engine and driver is required.
Minimum Weight:
(Post race with driver)
Stock Bore & Stroke 1000cc or less engines 950 lbs.
Up to 1205cc engines 1000 lbs.
Wings:
• Top Wings maximum 16 sq ft. center section with: Right Panel Maximum: 30” Tall, 60” long and must be 1,458 square inches (Example: 54”x30-34”, 54”x26”, 60”x24”)
• Left Panel Maximum: Max 30” tall, 60” long and 1,620 square inches (Example: 54”x30”, 60”x27”).
• Arm guard flare panel (batwings) maximum 4”
To enter online, got to http://www.tulsashootout.com and click on the link on the upper left hand corner of the screen that reads “Click Here To Pre-Enter”.
Teams wishing to enter by phone may do so by calling the Tulsa Shootout office at (918) 838-3777. The office is open Monday-Friday from 9:00 A.M. to 5:00 P.M. (CT). Faxes can also be sent to (918) 836-5517. Entry blanks can be downloaded at http://www.tulsashootout.com/downloads/get.aspx?i=292655.
The 2016 edition of the Tulsa Shootout takes place December 30, 2015 through January 2, 2016. Classes for the 31st annual Speedway Motors Tulsa Shootout will include:
• Winged Outlaw
• Non-Winged Outlaw
• “A” Class Winged
• “A” Class Non-Winged
• “A” Class Restricted
• Junior Sprints
• 1,200cc Non-Winged Mini Sprints
• 1,200cc Winged Mini Sprints
• ECOtec/Ford Focus Midgets
Micro and Junior Sprint competition will continue to follow the rules package utilized at Port City Raceway in Tulsa, Okla. Rules for the Micro divisions can be found at http://www.portcityracin.com/#!downloads/cxvn and http://www.tulsashootout.com/classes/default.aspx
If there are any questions about the rules, contact Matt Ward at 918-838-3777. The running order for the Tulsa Shootout is still in the works, and will be announced as the event draws closer.
Pre-entry is $103 per class and can be mailed to the Tulsa Shootout office at 1141 S. 83rd East Ave. Tulsa, OK 74112 or faxed to (918) 836-5517 starting September 30, 2015. Teams will also be able to enter online at http://www.tulsashootout.com. To enter by phone, contact Ashleigh Ward at 918-838-3777.
Entries received on, or after, December 9, 2015 are considered late and will be charged $120 per entry. Please note, any team wanting to pay for Pit Passes with a check must be pre-approved by the Tulsa Shootout office. Call the office at 918-838-3777 for approval.
For complete rules and information, log onto http://www.tulsashootout.com.
Need To Know Information:
Event: 31st annual Speedway Motors Tulsa Shootout
Move-In/Registration: December 29, 2015
Race Dates: December 30, 2015 through January 2, 2016
Where: Tulsa Expo Raceway - 4145 East 21st Tulsa, OK 74114
Pre Entries: Discounted Pre-Entry: December 9, 2015
Pre Entry Cutoff: December 23, 2015
Drivers who do not enter before the deadline will enter when they check in at the event on December 29, 2015.*
Send Entries to: Attn: Ashleigh Ward
Mail: Tulsa Shootout 1141 S. 83rd East Ave. Tulsa, OK 74112
Phone: 918-838-3777
Fax: 918-836-5517
Online: http://www.tulsashootout.com
Rules for the represented classes can be found at http://www.tulsashootout.com/classes/default.aspx.
Tentative Schedule:
Each racing vehicle (NOT ENTRY) is allowed one 9'x10' space only. Multiple vehicles may combine spaces to leave trailer inside the complex. All times below may vary depending on vehicle count.
Need To Know Information:
Tuesday, December 29, 2015 - Sign-In Day!
9:00 AM - 6:00 PM..................................Parking
12:00 PM - 6:00 PM.................................Sign-In All Classes
Wednesday, December 30, 2015 - Practice All Classes plus Heat Races.
8:00 AM............................................................Gates Open & Sign-In
9:00 AM - 5:00 PM............................................Practice
5:00 PM............................................................Grandstands Open
5:30 PM............................................................Heat Races
Driver/Non-Driver Friday Pit Pass $30
Adults $15.00 | Children FREE When Accompanied by an Adult
All TIMES MAY VARY DUE TO VEHICLE COUNT!
Thursday, December 31, 2016 - Heat Races & Qualifiers!
8:00 AM.............................................................Gates Open & Sign In
9:00 AM.............................................................Heat Races
9:00 AM............................................................Grandstands Open
Driver/Non-Driver Saturday Pit Pass $30
Adults $15.00 | Children FREE When Accompanied by an Adult
All TIMES MAY VARY DUE TO VEHICLE COUNT!
Friday January 1, 2016 - Heat Races & Qualifiers!
8:00 AM........................................................Gates Open & Sign In
9:00 AM.............................................................Heat Races
9:00 AM............................................................Grandstands Open
Driver/Non-Driver Saturday Pit Pass $30
Adults $15.00 | Children FREE When Accompanied by an Adult
All TIMES MAY VARY DUE TO VEHICLE COUNT!
Saturday January 2, 2016 - Non-Qualifiers & Features!
8:00 AM........................................................Gates Open
9:00 am........................................................Grandstands Opens
9:00 am........................................................Non-Qualifier Races
6:00 pm........................................................Opening Ceremonies
Features will follow Opening Ceremonies!
Driver/Non-Driver Saturday Pit Pass $40
Drivers Saturday Pit Pass included in Entry Fee
Adults $20.00 | Children FREE When Accompanied by an Adult
All TIMES MAY VARY DUE TO VEHICLE COUNT!
***Schedule is subject to change without notice. Please contact the Tulsa Shootout office if you have any questions.
====================================
Speedway Motors is the title sponsor of the Tulsa Shootout. Founded in 1952 by "Speedy" Bill Smith - a racer and street rodder himself - Speedway Motors has grown from a one-man operation to become the world's largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway Motors size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries. Find out more at www.speedwaymotors.com.
For more information about the Speedway Motors Tulsa Shootout log onto www.tulsashootout.com. The Tulsa Shootout can also be found at Facebook as well as Twitter.
Submitted By: Bryan Hulbert